Searching for an air conditioning system may be an overbearing process for the typical homeowner with all the types and options available. In order to maintain your sanity (and your money), it is helpful to have some guidelines at your disposal in order to narrow down the choices to only the ones that meet your needs. Below are a few tips that will assist you to decide the best options for you in your circumstance. I will list then by least expensive to most expensive.
Portable Air Conditioners
Portable air conditioners are a great utility appliance to have in any house. They are ideal for providing spot cooling for areas or small rooms in an’as needed’ basis. You will have to channel the heat to the exterior via the exhaust duct provided with the device so you will require access to make this happen. Condensation is gathered inside of the device and needs to be emptied after each use or when it fills up. When considering air conditioners, you need to view them as an appliance like your vacuum cleaner that will be pulled out when required and put away when not being used. If you imagine yourself using this appliance on a continuous basis in a location that is fixed, then this is probably not the best solution for your program. Here are some features that you should consider, Should You decide to proceed with the option:
Get the highest BTU rating that you can spend. waterloo air conditioning
Locate a unit using an automatic shut-off when the condensation reservoir fills up.
Look for components which come equipped with a washable air filter. This will cut down on your maintenance costs.
Other options like timers, oscillators, wheels, etc. are a matter of personal preference and price range.
Mini-Split -or- Ductless Air Conditioners
This really is a 2-piece cooling solution that does about precisely the exact same job as window units but does not call for a window and is very quiet. There is A hole punched in the exterior wall of your home to provide air. Copper tubing connects the condenser that is installed on a slab beyond your property and the fan unit. Most ductless systems that I’ve installed are the result of never having a window available where the heating system was required, or that the noise was not acceptable. If this sounds like you, then here are some things you should consider before selecting the right unit:
The unit should be sized by a professional depending on the square footage of the area to be cooled in addition to the climate. Considerations like orientation and shading of the outside walls also play in the calculation. Kitchener Air Conditioning & Furnace Repair and Installation
Look for a washable air filter to reduce your maintenance cost.
R-22 Freon has been phased out, therefore only consider a PURON-based solution. Split System Central Air Conditioners Split system air conditioning is the most common alternative in the US or in areas. There are three elements to a broken system solution: The compressor which is mounted onto a slab outside of your house, condenser and the blower/heater that are installed in-line with your ductwork in your attic area. The rooms in your home and the blower’s ductwork services every one doubles as a heater to the winter seasons that are short. The air is recirculated within your house and filtered via a return. If your home was not initially designed to encourage a central heat and ac solution, then attempting to retrofit into your home can be quite pricey. Routing the ductwork can be quite tricky if not impossible in some cases for homes not designed to allow for it. Hogg Mechanical Then you should consider the following if you are considering a brand new central heating and air conditioning solution:
Do not use the size of your previous unit to determine the size required for a replacement unit. The vast majority of systems are. Installing a unit that is too large will lead to higher energy intake and condensation removal. Have an expert dimension your system based on Manual”J” criteria. If your Ac specialist Doesn’t understand what’s, then run off quickly (-;
Consider replacing your ducts in precisely the same time. Ductwork includes mold and other health dangers. New ductwork will provide you with efficacy and a healthier living environment.
Contemplate only Puron-based systems because freon (R22) coolant has been phased out.
Weigh the cost of systems using a SEER rating of 16 or higher against those with a lower SEER score to ascertain that the Energy Tax Credit offered from the EPA will do the job for you.
If you have health issues, then you may want to check into electronic air cleaners and UV lights as extra low-cost accessories which may be installed for cleaner air.
Window Mounted Air Conditioners
Window components are a good solution for heating individual rooms inside your house and are used as the principal cooling solution in most of the northern US where high temperatures are limited to approximately three months from this year. Window components could be installed from the homeowner without the aide of an air conditioning professional. It is rare to find units which are removed an stored away during the none summertime, Even though they are not meant to be permanent fixtures. The downside to the window is that they create a great deal of noise, both indoors and outside. Should you need to cool more than 1 room, then you will need additional components. Listed below are a Couple of factors if you are shopping for window components:
Maximum BTU rating that you can spend.
A hardy window/window framework to support the weight of this unit.
Condensation drips out of the back of the device. Be certain it is not going to land somewhere that will lead to a possible health hazard for children and pets.
You’ll need a 3-prong outlet within close proximity of your own window to provide power to the device.
Is your filter available from the front of the unit? This is particularly essential for 2nd story software.
Bundle System Air Conditioners
A package system is a single unit solution which has all of the components which are observed in a split platform solution inside of a single unit. You will find most bundle system in office buildings. There are some home applications in largely high-end houses where the units are hidden from the sight so as to not interrupt the landscaping. The main difference between a package system versus a busted system is that air is channeled in from the exterior and warmth exhaust is pumped out. As a result of this, bundle solutions are less energy efficient than divide systems.
You have the very same concerns when looking at a bundle solution as you do use a split system. The distinction is that the SEER rating condition is 14 rather than 16.
Hopefully, we have given you some information which will help narrow down the seemingly endless options that are available for your air conditioning needs.